Report: Baseline assessment of the demo sites

Report: Baseline assessment of the demo sites

This document provides the synthesis of the monitoring conducted during the baseline period of the PVSITES project meaning before the installation of the BIPV systems in each pilot site. The main results in terms of energy consumptions and indoor environmental conditions are presented for each of the six pilots. 

Download
Report: Installation and execution of monitoring of BIPV systems

Report: Installation and execution of monitoring of BIPV systems

The document reports the installation of monitoring equipment that was conducted in the pilot sites to establish the baseline situation of the sites in terms on energy performance and indoor environmental conditions. The document also presents the monitoring equipment that is planned to be deployed in addition to assess the BIPV systems performance. This equipment will be deployed at the same time or just after the BIPV systems are installed in the pilot sites.

Download
Conference paper: Overview of PVSITES objectives

Conference paper: Overview of PVSITES objectives

This Open Access paper supported the presentation of the PVSITES project at the Sustainable Places conference (Middlesbrough, UK) in June 2017. It summarises the project goals and expected impacts.

Download
Report: Prototype of BIPV simulation tool - Second version

Report: Prototype of BIPV simulation tool - Second version

This deliverable presents the PVSITES software tool prototype state as of December 2016 and its exploitable results. It characterizes the distinctive functionalities, connections, maturity levels and steps needed to maximize exploitation, market uptake and commercialization of the software suite.

Download
Report: Prototype of web services platform - First version

Report: Prototype of web services platform - First version

Summary of the state of the PVSITES platform for web services in its preliminary prototype version and its related exploitable results, as of December 2016. The report characterizes the distinctive functionalities, connections, maturity levels and steps needed to maximize exploitation, market uptake and commercialization of the online platform.

Download
Article: On the analytical calculation of the solar heat gain coefficient of a BIPV module

Article: On the analytical calculation of the solar heat gain coefficient of a BIPV module

This open access peer-reviewed article describes a new analytical calculation method to characterise the solar heat gain coefficient (SHGC) of glass-glass photovoltaic modules for building integration. The proposed simplified calculations avoid the need for complex iterative procedures to solve the non-linear equations of the thermal balance and allow the use of standardized or design values for the involved physical parameters. The paper is authored by T.Baenas and M.Machado and was published in Energy and Buildings 151 (2017) 146-156. It can also be read online

Download
Report: Energy audit of PVSITES demonstration buildings and identification of BIPV possibilities

Report: Energy audit of PVSITES demonstration buildings and identification of BIPV possibilities

For each demonstration site this report provides a description, a pre-audit of energy usage, and a pre-dimensioning for the BIPV systems and energy storages to be installed. Electricity production estimates are provided. The pre-dimensioning phase considers several installation configurations and proposes a preferred layout. This work is to be considered preliminary with changes likely to occur before real-life implementation.

Download
Report: Templates for a technical description of the PVSITES BIPV products portfolio - First version

Report: Templates for a technical description of the PVSITES BIPV products portfolio - First version

This report provides templates to guide the gathering of information about the PVSITES products under development. Once filled out, the templates will be used to to publish information about the products online, to implement the products as BIM objects in the PVSITES software tool, and to produce the final product portfolio.

Download
Report: Recommendations on storage systems for BIPV systems

Report: Recommendations on storage systems for BIPV systems

This document presents available battery technologies and their testing in order to choose the most suitable for BIPV applications. The tested batteries are aqueous sodium-ion, lithium-ion, and Li-ion LFP/LTO batteries. Using the IEC 61427-2 clause 6.5 standard, lithium-ion LFP/ G batteries are preferred for BIPV applications since they provide higher energy densities than LFP/LTO and Aquion batteries, and higher efficiency than Aquion batteries.

Download
Report: Common monitoring guidelines for the demonstration sites

Report: Common monitoring guidelines for the demonstration sites

This document describes the monitoring guidelines that are to be followed by each pilot site of the PVSITES project in terms of measurement to be conducted. Monitoring is needed to evaluate the impact of the BIPV technologies on the performance of the buildings or a portion of the buildings in terms of energy consumptions and indoor conditions, and to assess the performances of the implemented BIPV technologies themselves.

Download